PUG301B Engine Rear Torque bush (70mm) XU & EW engines
Description
Additional Informations
Query on the Item?
Original VIBRA - TECHNICS Engine Rear Torque bush (70mm) XU & EW engines
Vibra Technics item number: PUG301B
A direct replacement bush insert for the rear mounting. (also used on some early 106's, 309, 406). This bush reacts most of the overrun and accelaration torque and therefore controls the powertrain tipping forwards and backwards under power on off conditions. By using a large bush we are able to isolate some noise and vibration but using a triple bonded bush with a stiff rubber compound significantly reduces movement. This gives the car a much 'tighter' feel and reduces stresses on exhaust and other ancilliaries attached to the powertrain.
Please check the diameter of your existing bush. It should be 70mm
Vibra-Technics engine and suspension mounts have been specially developed for high-speed performance, for example motorsports, racing, hill climbs and for sporty driving modes on the road.
With these engine mounts the handling of the vehicle is greatly improved because the engine, by the harder suspension, no longer tends so much. Especially with winding roads is an improvement to perceive.
Vibra-Tech mounts are fully compatible with the original engine mounts!
Plug and Play.
Scope of delivery:
- 1 x VIBRA - TECHNICS Engine Rear Torque bush (70mm) XU & EW engines PUG301B
Manufacturer:
Vibra-Technics Tel: 01536 202789
Unit 21-22 Fax: 01536 202787
Alexander Court Email: mailbox@vibra-technics.co.uk
Fleming Road
Vibra Technics item number: PUG301B
A direct replacement bush insert for the rear mounting. (also used on some early 106's, 309, 406). This bush reacts most of the overrun and accelaration torque and therefore controls the powertrain tipping forwards and backwards under power on off conditions. By using a large bush we are able to isolate some noise and vibration but using a triple bonded bush with a stiff rubber compound significantly reduces movement. This gives the car a much 'tighter' feel and reduces stresses on exhaust and other ancilliaries attached to the powertrain.
Please check the diameter of your existing bush. It should be 70mm
Vibra-Technics engine and suspension mounts have been specially developed for high-speed performance, for example motorsports, racing, hill climbs and for sporty driving modes on the road.
With these engine mounts the handling of the vehicle is greatly improved because the engine, by the harder suspension, no longer tends so much. Especially with winding roads is an improvement to perceive.
Vibra-Tech mounts are fully compatible with the original engine mounts!
Plug and Play.
Scope of delivery:
- 1 x VIBRA - TECHNICS Engine Rear Torque bush (70mm) XU & EW engines PUG301B
Manufacturer:
Vibra-Technics Tel: 01536 202789
Unit 21-22 Fax: 01536 202787
Alexander Court Email: mailbox@vibra-technics.co.uk
Fleming Road
Do you have any questions on this item?
